On November 30 1934 The LNER Class A3 Pacific steam locomotive No. 4472 Flying Scotsman became the first Steam Locomotive to officially exceed 100mph. The Flying Scotsman was built in 1923 for the London and North Eastern Railway (LNER) at Doncaster Works to a design of H.Nigel Gresley. It was employed on long-distance express trains on the LNER and its successors, British Railways Eastern and North-Eastern Regions, notably on the 10am London to Edinburgh Flying Scotsman train service after which it was named.The locomotive is notable for having set two world records for steam traction; becoming the first steam locomotive to be officially authenticated at reaching 100 miles per hour (160.9 km/h) on 30 November 1934,and then setting a record for the longest non-stop run by a steam locomotive when it ran 422 miles (679 km) on 8 August 1938. It was retired from regular service in 1963 after covering 2,076,000 miles (3,341,000 km),Flying Scotsman gained considerable fame in preservation under the ownership of Alan Pegler, William McAlpine, Tony Marchington and finally the National Railway Museum. As well as hauling enthusiast specials in the United Kingdom, the locomotive toured extensively in the United States (from 1969 to 1973) and Australia (from 1988 to 1989).Flying Scotsman has been described as the world’s most famous steam locomotive
The locomotive was completed in 1923, construction having been started under the auspices of the Great Northern Railway (GNR). It was built as an A1, initially carrying the GNR number 1472, because the LNER had not yet decided on a system-wide numbering scheme’ Flying Scotsman was something of a flagship locomotive for the LNER. It represented the company at the British Empire Exhibition at Wembley in 1924 and 1925. Before this event, in February 1924 it acquired its name and the new number of 4472. From then on it was commonly used for promotional purposes.With suitably modified valve gear, this locomotive was one of five Gresley Pacifics selected to haul the prestigious non-stop Flying Scotsman train service from London to Edinburgh, hauling the inaugural train on 1 May 1928. For this the locomotives ran with a new version of the large eight-wheel tender which held 9 tons of coal. This and the usual facility for water replenishment from the water trough system enabled them to travel the 392 miles (631 km) from London to Edinburgh in eight hours non-stop. The tender included a corridor connection and tunnel through the water tank giving access to the locomotive cab from the train to permit replacement of the driver and fireman without stopping the train. The following year the locomotive appeared in the film The Flying Scotsman. On 30 November 1934, running a light test train, 4472 became the first steam locomotive to be officially recorded at 100 mph (160.9 km/h) and earned a place in the land speed record for railed vehicles; the publicity-conscious LNER made much of the fact.
On 22 August 1928, there appeared an improved version of this Pacific type classified A3; older A1 locomotives were later rebuilt to conform. On 25 April 1945, A1-class locomotives not yet rebuilt were reclassified A10 in order to make way for newer Thompsonand Peppercorn Pacifics. Flying Scotsman emerged from Doncaster works on 4 January 1947 as an A3, having received a boiler with the long “banjo” dome of the type it carries today. By this time it had been renumbered twice: under Edward Thompson’scomprehensive renumbering scheme for the LNER, it became no. 502 in January 1946; but in May the same year, under an amendment to that plan, it become no. 103. Following nationalisation of the railways on 1 January 1948, almost all of the LNER locomotive numbers were increased by 60000, and no. 103 duly became 60103 in December 1948. Between 5 June 1950 and 4 July 1954, and between 26 December 1954 and 1 September 1957, under British Railways ownership, it was allocated to Leicester Central shed on the Great Central, running Nottingham Victoria to London Marylebone services via Leicester Central.All A3 Pacifics were subsequently fitted with a double Kylchap chimney to improve performance and economy. This caused soft exhaust and smoke drift that tended to obscure the driver’s forward vision; the remedy was found in the German-type smoke deflectors fitted from 1960, which somewhat changed the locomotives’ appearance but solved the problem
In 1963 Flying Scotsman Number 60103 finished working.Proposed to be saved by a group called “Save Our Scotsman”, they were unable to raise the required £3,000. Luckily Alan Pegler, Having first seen the locomotive at the British Empire Exhibition in 1924, bought Flying Scotsman using money he had received for his share holding when Northern Rubber was sold to Pegler’s Valves. He spent the next few years spending large amounts of money having the locomotive restored at Doncaster Works as closely as possible to its LNER condition: the smoke deflectors were removed; the double chimney was replaced by a single chimney; and the tender was replaced by one of the corridor type with which the locomotive had run between 1928 and 1936. It was also repainted into LNER livery, although the cylinder sides were painted green, whereas in LNER days they were always black. Peglar then persuaded the British Railways Board to let him run enthusiasts specials, And it worked a number of rail tours, including a non-stop London–Edinburgh run in 1968 – the year steam traction officially ended on BR. Then in September 1966 Pegler purchased a second corridor tender, and adapted as an auxiliary water tank; retaining its through gangway, this was coupled behind the normal tender.
Pegler had a contract permitting him to run his locomotive on BR until 1972, but following overhaul in the winter of 1968–69 then Prime Minister Wilson agreed to support Pegler running the locomotive in the United States and Canada to support British exports. To comply with local railway regulations, it was fitted with: acowcatcher; bell; buckeye couplings; American-style whistle air brakes; and high-intensity headlamp. the tour ran into immediate problems, with some states seeing the locomotive as a fire-hazard. However, the train ran from Boston to New York, Washington and Dallas in 1969; from Texas to Wisconsin and finishing in Montreal in 1970; and from Toronto to San Francisco in 1971 — a total of 15,400 miles (24,800 km).However, in 1970 Ted Heath’s Conservatives ousted Wilson’s Labour Party, and withdrew financial support from the tour; but Pegler decided to return for the 1970 season. By the end of that season’s tour, the money had run out and Pegler was £132,000 in debt, with the locomotive in storage at the U.S. ArmySharpe Depot to keep it away from unpaid creditors.Pegler worked his passage home from San Francisco to England on a P&O cruise ship in 1971, giving lectures about trains and travel; he was declared bankrupt in the High Court 1972.Fears then arose for the engine’s future, the speculation being that it could take up permanent residence in America or even be cut up. However in January 1973, William McAlpine stepped in and bought the locomotive for £25,000. After its return to the UK via the Panama Canal in February 1973 the locomotive Was restored at Derby Works. Trial runs took place on the Paignton and Dartmouth Steam Railway in summer 1973, after which it was transferred to Steamtown (Carnforth)
In October 1988 the locomotive arrived in Australia to take part Australia’s bicentenery celebrations as a central attraction in the Aus Steam ’88 festival. During the course of the next year it travelled more than 45,000 kilometres (28,000 mi) over Australian rails, concluding with a return transcontinental run from Sydney to Perth via Alice Springs. Other highlights included Flying Scotsman double-heading with NSWGRPacific locomotive 3801, a triple-parallel run alongside broad gauge Victorian Railways R class locomotives, parallel runs alongside South Australian Railways locomotives 520and 621, and a reunion with GWR 4073 Class Pendennis Castle in Perth. 8 August 1989 Flying Scotsman set another record en route to Alice Springs from Sydney, travelling 679 kilometres (422 mi) from Parkes to Broken Hill non-stop, the longest such run by a steam locomotive ever recorded. A plaque on the engine records the event. Returned to the UK, by 1995 it was in pieces at Southall Railway Centre in West London, owned by a consortium that included McAlpine as well as music guru and well-known railway enthusiast Pete Waterman. Facing an uncertain future owing to the cost of restoration and refurbishment , salvation came in 1996 when Dr Tony Marchington, bought the locomotive, and had it restored over three years to running condition at a cost of £1 million. Sadly in September 2003 Marchington was declared bankrupt and CEO Peter Butler stated that the company only had enough cash to trade until April 2004. The locomotive was bought in April 2004 by the National Railway Museum in York, and it is now part of the National Collection. it ran for a while to raise funds for its forthcoming 10-year major boiler recertificationn In January 2006, Flying Scotsman entered the Museum’s workshops for a major overhaul to return it to Gresley’s original specification and renew its boiler certificate. In 2013 The locomotive was moved to Bury work to return it to running condition by 2015. Sadly this took longer than expected because the repairs proved prohibitively expensive and at one time Flying Scotsman’s future looked uncertain, However the rebuilt LNER 4472 Flying Scotsman is due to visit the Severn Valley Railway for the Autumn SteamGala 2016.