Thomas Newcomen

NewcomenEnglish inventor and engineer Thomas Newcomen was born 24 February 1664 in Dartmouth, Devon. He is credited with creating the first practical steam engine for pumping water, the Newcomen steam engine. At the time Devon was noted for its tin mines, where flooding was a major problem, limiting the depth at which the mineral could be mined. Newcomen’s great achievement was his steam engine, developed around 1712, combining the ideas of Thomas Savery and Denis Papin. It is likely that Newcomen was already acquainted with Savery, whose forebears were merchants in south Devon. Savery also had a post with the Commissioners for Sick and Hurt Seamen, which took him to Dartmouth. Savery had devised a ‘fire engine’, a kind of thermic syphon, in which steam was admitted to an empty container and then condensed. The vacuum thus created was used to suck water from the sump at the bottom of the mine. The ‘fire engine’ was not very effective and could not work beyond a limited depth of around thirty feet.Newcomen replaced the receiving vessel (where the steam was condensed) with a cylinder containing a piston. Instead of the vacuum drawing in water, it drew down the piston. This was used to work a beam engine, in which a large wooden beam rocked upon a centralfulcrum. On the other side of the beam was a chain attached to a pump at the base of the mine. As the steam cylinder was refilled with steam, readying it for the next power stroke, water was drawn into the pump cylinder and expelled into a pipe to the surface by the weight of the machinery. Newcomen and his partner John Calley built one of the first engines at the Conygree Coalworks near Dudley in the West Midlands. A working replica of this engine can be seen at the Black Country Living Museum nearby.

NewcomenThe Newcomen engine held its place without material change for about three-quarters of a century, spreading gradually to more and more areas of the UK and to mainland Europe. At first brass cylinders had been used but these were expensive and limited in size. New iron casting techniques pioneered by the Coalbrookdale Company in the 1720s allowed bigger and bigger cylinders to be used, up to about 6 feet (1.8 m) in diameter by the 1760s, and experience gradually led to better construction and minor refinements in layout. Its mechanical details were much improved by John Smeaton, who built many large engines of this type in the early 1770s; his improvements were rapidly adopted. By 1775 about 600 Newcomen engines had been built, although many of these had worn out before then, and been abandoned or replaced. The Newcomen Engine was rather inefficient by today’s standards, but was probably as complicated as engineering and materials techniques of the early eighteenth century could support. Much heat was lost when condensing the steam, as this cooled the cylinder. This did not matter unduly at a colliery, where unsaleable small coal (slack) was available, but significantly increased the mining costs where coal was not readily available, as in Cornwall. Therefore, Newcomen’s engine was gradually replaced after 1775 in areas where coal was expensive (especially in Cornwall) by an improved design, invented by James Watt, in which the steam was condensed in a separate condenser.

The Watt steam engine, aided by better engineering techniques including Wilkinson’s boring machine, was much more fuel efficient, enabling Watt and his partner Matthew Boulton to collect substantial royalties based on the fuel saved.Watt subsequently made other improvements, including the double-acting engine, where both the up and down strokes were power strokes. These were especially suitable for driving textile mills, and many Watt engines were employed in these industries. At first attempts to drive machinery by Newcomen engines had mixed success, as the single power stroke produced a jerky motion, but use of flywheels and better engineering largely overcame these problems. By 1800, hundreds of non-Watt rotary engines had been built, especially in collieries and ironworks where irregular motion was not a problem but also in textile mills. Despite Watt’s improvements, Common Engines (as they were then known) remained in use for a considerable time, and many more Newcomen engines than Watt ones were built even during the period of Watt’s patent (up to 1800), as they were cheaper and less complicated: of over 2,200 engines built in the eighteenth century, only about 450 were Watt engines. Elements of Watt’s design, especially the Separate Condenser, were incorporated in many “pirate” engines. Even after 1800 Newcomen type engines continued to be built and condensers were added routinely to these. They were also commonly retro-fitted to existing Newcomen engines (the so-called “pickle-pot” condenser).

There are examples of Newcomen engines in the Science Museum (London) and the Ford Museum, Dearborn amongst other places. Perhaps the last Newcomen-style engine to be used commercially – and the last still remaining on its original site – is at the Elsecar Heritage Centre, near Barnsley in South Yorkshire. The only Newcomen engines that can be shown working are believed to be the Newcomen Memorial Engine at Dartmouth and the replica engine at the Black Country Museum in Dudley, West Midlands. Comparatively little is known of Newcomen’s later life. In his later life (at least), the engine affairs were conducted through an unincorporated company, the ‘Proprietors of the Invention for Raising Water by Fire’. Its secretary and treasurer was John Meres, clerk to the Society of Apothecaries in London. That society formed a company which had a monopoly on supplying medicines to the Navy providing a close link with Savery, whose will he witnessed. The Committee of the Proprietors also included Edward Wallin, a Baptist of Swedish descent; and pastor of a church at Maze Pond, Southwark. Newcomen died at his house 5 August 1729, and his body was buried atBunhill Fields, a cemetery in north London; the exact location of his grave is now not known.By the time of his death, about 75 of his engines, operating under Savery’s patent (extended by statute so that it did not expire until 1733), had been installed by Newcomen and others in most of the important mining districts of Britain: draining coal mines in the Black Country, Warwickshire and near Newcastle upon Tyne; at tin and copper mines in Cornwall; and in lead mines in Flintshire andDerbyshire, amongst other places

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Rabid Reader's Reviews

Book Reviews from a Reader for Readers

SPeye Joe (Welfarewrites)

Joe Halewood writes about tenant and welfare wrongs

Nature's Place

The place of Nature in the 'ordinary' Spiritual Life through Meditation using Macro Photography to illustrate.

Tish Farrell

Writer on the Edge

Sensible Self Improvement

Love, Life and Happiness

100 Records That Set The World On Fire

( While No One Was Listening )

Scribble and Scrawl

Smart living, Savvy lifestyle blog

Purplerays

spiritual enlightenment and self improvement

Deidra Alexander's Blog

I have people to kill, lives to ruin, plagues to bring, and worlds to destroy. I am not the Angel of Death. I'm a fiction writer.

@ShashaSelflove

Staying Positive

ipekseyhanpoyrazkarayel

Asla İdeallerinden Vazgeçme Asla! Never Give Up Your İdeals Never!

Yakup Uykutalp

"Yazmak Yaşamaktır"

Sourav Adhikari

Live Positive Read Positive

Kev Brockschmidt, Illustrator

Flotsam and Jetsam on the Cartoon Art Sea...

%d bloggers like this: